Upload data to AutoTURN Online

Upload drawing objects and background images to AutoTURN Online in order to create the drag curve simulation based on them.

After calling the function Upload data to AutoTURN Online you have the option of transferring drawing objects and a background image to AutoTURN Online.

1. Choose whether you want to create a new drawing or whether you want to add the data to an existing drawing.
2. In the area More settings make a selection of the data to be uploaded.
3. Confirm your selection with [OK]. The data is uploaded to AutoTURN Online.

In the area Send to AutoTURN Online can either be a new drawing created at AutoTURN Online or a existing drawing be replaced.

If you want to create a new drawing with AutoTURN Online, you can assign a name in the field or use the drawing name.
If an existing drawing is to be replaced, you can select the drawing to be replaced in the selection field.
The list with the drawings can be opened with the button updated. You also have the option of viewing the selected drawing using the button to be viewed and edited in AutoTURN Online (see Work with AutoTURN Online).

In the area More settings get involved background image and the Drawing objects to be transferred to AutoTURN Online.
If you want to transfer a background image to AutoTURN Online, you can use the button choose picture select in the drawing.
There are three options for choosing the drawing objects to be uploaded:

You can generate the drag curve analysis either as a curve travel simulation or as a route guidance simulation.

In the browser window you can see the data that you have transferred to AutoTURN Online.
The browser window is structured as follows:
On the right edge is the general toolbar, in the middle is the Simulation area and below is the AutoTURN online toolbar.

With the button [OK] the simulation is completed and the function for Insert the simulation into the drawing open.

These tools provide access to general functions such as drawing, measuring, zooming and scaling.

	Draw a polyline	Create a polyline with connected straight line and arc segments that serve as path elements for vehicle simulations. To switch between a straight line and an arc, right-click and then use the context menu.
	Zoom extensions	Zooming the display so that all visible elements in the drawing are fully included.
	Zoom window	Zooming the display to a rectangular area defined with the mouse.
	Measure distance	Show the distance between two points on the drawing.
	Ortho mode	Restrict the movement of the mouse pointer to the horizontal and vertical directions.

AutoTURN online tools are available in the browser from the AutoTURN online toolbar.

	Select current vehicle	Defining the current vehicle for generating a vehicle simulation.
	Create curve travel simulation	It creates a path that follows an arc from the starting position to the position of the mouse.
	Create route guidance simulation	Place a route simulation based on the following selected route elements.
	Place vehicle in simulation	Places representations of the current vehicle in plan view at any point along the route.
	Delete vehicle from simulation	Deletes vehicles in simulations made with the tool Place vehicle in simulation were placed.
	Continue the existing simulation	Continue the creation of an existing vehicle simulation in the drawing.
	Delete the last section of the simulation	Delete the last section of a selected vehicle simulation.
	Place the vehicle profile in the drawing	Insert a dimensioned profile view of the current vehicle.
	Change settings	Defines the various parameters for vehicle simulations.
	Manage simulations	Manages vehicle simulations.

A curve simulation draws a path using the properties and orientation of the currently selected vehicle. With this flexible simulation you can draw in real time and try out the different possibilities.

1. Click the button Create curve travel simulation.
2. Set the starting point and the angle of the vehicle with one click and then move the mouse. Click to create vertices along the path and use the mouse to define the direction of travel.
3. To end the simulation, either right-click and select break up or you choose break up in the menu.
4. If you want to start over, right-click the simulation path and click Delete.

For a route simulation you need a predefined path that the selected vehicle can follow.

1. There should be a single polyline in the drawing to serve as a path.
2. Click the tool Route simulation create.
3. Select the polyline.
4. Click to define the direction of the vehicle.
5. If you click again, the route simulation is generated along the polyline.

Insert simulation of AutoTURN Online into the drawing
Manage drawings submitted to AutoTURN Online