encoding

Lines, circles, arcs, etc. and the attributes of the measured points can already be specified during the measurement, which are then entered into DATAflor CAD can be automatically converted into drawing elements with associated factual information.

The coding is in DATAflor CAD predefined. In the window encoding you can now easily adapt the content of the coding list according to your own working method. Further coding can also be defined.

code table_factual information.pdf
code table_graphic information.pdf

Example from the measurement file:
The code 30510070 means that the measured point is the position of a deciduous tree, which is represented in the drawing by a circle with a diameter of 70 cm.

With a double click in the field Remark an entry can be made in the selected coding. Then confirm your entry with Enter.

After a double click in the column Block can be [...] an additional block (DWGFile) can be selected. When importing total station data, a block with a scaling can be inserted directly for a measured point.

With [OK] the changes are saved.

With save as default the current settings are saved. This standard is now the default for all new drawings.
Manual changes are made by calling Load standard the default setting loaded.
You can use the list of encoding Copy to clipboard and insert it into a word processing program.

With Administer can in addition to the configuration Standard further configurations can be created.