Table of Contents
encoding
Description
Lines, circles, arcs, etc. and the attributes of the measured points can already be specified during the measurement, which are then entered into DATAflor CAD can be automatically converted into drawing elements with associated factual information.
The coding information applies to all import commands.
The coding is in DATAflor CAD predefined. In the window encoding you can now easily adapt the content of the coding list according to your own working method. Further coding can also be defined.
Coding lists
code table_factual information.pdf
code table_graphic information.pdf
Example from the measurement file:
The code 30510070 means that the measured point is the position of a deciduous tree, which is represented in the drawing by a circle with a diameter of 70 cm.
30 | = Deciduous tree |
5 | = Circle |
1 | = Point with diameter |
0070 | = 70 cm |
Features
Functionality
With a double click in the field Remark an entry can be made in the selected coding. Then confirm your entry with Enter.
After a double click in the column Block can be [...] an additional block (DWGFile) can be selected. When importing total station data, a block with a scaling can be inserted directly for a measured point.
For the use of blocks, see the Measurement please the following: The Graphic code in the field of Punkt will be added. In addition to the coding for the simple Point (0) and Point with diameter (1) can now too Point with block (3) be used. With digits 5-8, the Scaling in cm Are defined.
With [OK] the changes are saved.
DATAflor provides a selection of blocks. These files are located in the user directory (see Important instructions > Chapter Data Backup] Yours DATAflor CAD program in the folder encoding.
You can also choose your own blocks. Please note the information on creating blocks (see Tips and Tricks > Chapter Create block.
Configuration menu
With save as default the current settings are saved. This standard is now the default for all new drawings.
Manual changes are made by calling Load standard the default setting loaded.
You can use the list of encoding Copy to clipboard and insert it into a word processing program.
With Administer can in addition to the configuration Standard further configurations can be created.
OK | Applies the changes. |
cancellation | Discards all changes. |
Shop | Loads a saved configuration that was previously marked in the list. |
Save | Saves the current settings in the selected configuration. |
Save as | Saves the current settings under a defined name. The new configuration is added to the list. |
Copy | Copies a setting that has already been saved. |
Delete | Deletes a saved setting. |