Table of Contents
Object line invest
Command: OLCREATE
Description
With this function you create individual object lines, which can then be used in your drawing with the object line manager.
Application
For the new object line you need a reference line in the drawing and one or more objects for the pattern.
First, you'll draw one Reference line of the type Polyline.
This reference line must mandatory orthogonal be. To do this, use the Ortho mode (F8 key).
Depending on your needs, it can be practical to have the object line in one certain yardstick so that the reference line is, for example, exactly 1 m long.
You can now above and below this reference line Segments invest. These segments can be of type Line, polyline, circle, arc or spline .
Would you like the object lines Color fills assign, you should closed Use objects for the pattern.
Now call the command Object line invest .
Now first select the reference line and subsequently select the segments .
Individual segments can be identified with the help of the Shift key deselect again.
When you have the desired segments in the selection, confirm with Enter. Assign one in the preview window Namur for the object line and then confirm the object line with [OK].
The new object line is opened in the object line manager. Changes to the properties of the object line can be made here. You can find information on these properties, such as color fills here.
With a click of [OK] becomes the object line saved. She is now calling the Object line available in the object line manager.