Table of Contents
3D-Objekte
Description
The 3D-Objekte 
in principle correspond to normal objects (see objects). The only difference lies in the derivation of the properties segment and area. These are not in the projection (2D), but in the 3D development of the object or in Processing determined on a 3D surface, which with the DATAflor Terrain model was created. If a 2D object is recorded as a 3D object, the derived distance and area are identical.
Application
After an object has been recorded, the tab Features the settlement in the property 3D control.
On the one hand, the Processing of the object: In normal processing, the object is treated like a surface and documented accordingly.
On the other hand, the object can be selected on a Surface Unfold: This option is very practical, as the entire drawing can also be available in 2D, which has a positive effect on the working speed and does not have to be concerned with the height planning when creating the objects.
When processing on a Terrain model Surface can Triangulations or Grids to be selected. If the surface is later deleted, the property becomes 3D automatically open Processing set. If the derived 3D object is moved in the drawing so that it is no longer in the area of the surface, the 3D object is also removed from the Mass tree deleted. However, a note appears to draw your attention to this. When changing the surfaces with the DATAflor Terrain model the properties of the objects in the Quick-Masses tracked.
If the area of a surface is to be calculated, which is available as terrain in the DTM, the 3D development on the surface is automatically used during the acquisition.
To several new ones 3D-Objekte can also use the selected Group with the property 3D = processing set up.
After capturing you can go to the tab Features in The Field Info call up whether the object was recorded or on which surface it was recorded.