Table of Contents
Graphics card settings for GRÜNSTUDIO 3D
Description
To ensure that the DATAflor GRÜNSTUDIO To achieve 3D, the use of a high quality graphics card with at least 1 GB graphic memory. However, 2 GB or more recommended. An on-board graphics card (e.g. from Intel) is NOT recommended and can lead to an unsatisfactory display.
However, it has to DATAflor GRÜNSTUDIO 3D in the 3D settings of the graphics card be released. With PCs this usually happens automatically, with laptops a manual changeover is usually necessary. Otherwise the on-board graphics card may be used for the Green Studio 3D.
Check the graphics settings
First, check which graphics card is from GRÜNSTUDIO is used. To do this, proceed as follows:
- In the lower area you can see which graphics card is currently in use.
Please notice that DATAflor GRÜNSTUDIO 3D completely closed and after Change graphics settings must be restarted for the settings to take effect.
Change the graphics settings
Read through this Exampleas you do with a NVIDIA graphics card the high-performance processor for DATAflor GRÜNSTUDIO Activate 3D. To do this, proceed as follows:
- The page with the 3D settings opens. There you select the tab program settings .
- Now click the button [Add].
- Your program should CAN'T be listed, add it manually. To do this, click the button [Search].
- You get back to the window Searchin which your application appears in the list. You can use the program [Add selected program] take over.
- Open this list and select the NVIDIA high performance processor .
- Then confirm your selection with the button [Take over].
- close the window NVIDIA Control Panel.
- Start the DATAflor GRÜNSTUDIO 3D again.
Repeat the step for Check the graphics settingsto see if the NVIDIA high performance processor has taken over.