Table of Contents
Graphics card settings for DATAflor CAD
Description
To ensure a flawless and fluid display of the DATAflor To achieve CAD applications, it is advisable to use a for AutoCAD certified graphics card. An on-board graphics card (e.g. from Intel) is NOT recommended and can lead to an unsatisfactory display.
However, the CAD applications in the 3D settings of the graphics card be released. With PCs this usually happens automatically, with laptops a manual changeover is usually necessary. Otherwise the on-board graphics card may be used for the Green Studio 3D.
Check the graphics settings
First, check which graphics card is from GREENXPERT, ETB-CAD, CADXPERT or LANDXPERT is used. To do this, proceed as follows:
- Öffnen Sie die [Options] in the program menu.
- In the window graphics performance can be seen in the upper area under Hardware setupwhich graphics card is currently used for your program.
- If, in addition to an on-board graphics card (e.g. Intel), you have another graphics card for 3D applications (e.g. NVIDIA or AMD) and this is listed there, all settings are correct.
- If the additional 3D graphics card is NOT listed there and the on-board graphics card is activated instead, continue with the next chapter: Change the graphics settings.
Please note that the DATAflor CAD application completely closed and after Change graphics settings must be restarted for the settings to take effect.
Change the graphics settings
Read through this Exampleas you do with a NVIDIA graphics card the high-performance processor for the DATAflor Activate CAD products. To do this, proceed as follows:
- The page with the 3D settings opens. There you select the tab program settings .
- Now click the button [Add].
- Your program should CAN'T be listed, add it manually. To do this, click the button [Search].
- You get back to the window Searchin which your application appears in the list. You can use the program [Add selected program] take over.
- Open this list and select the NVIDIA high performance processor .
- Then confirm your selection with the button [Take over].
- close the window NVIDIA Control Panel.
- Start the DATAflor CAD application again.
Repeat the step for Check the graphics settingsto see if the NVIDIA high performance processor has taken over.