Menu and icons

The Irrigation Manager is programmed in a context-dependent manner. This means that all functions in the menu, in the tabs, all symbols and the functions of the right mouse button are only available if the function makes sense at this point. If this is not the case, the entry is grayed out.

The menu item Objects can be found within the Irrigation Manager also always call with the right mouse button. This is mainly about administrative functions and the creation of new objects.

Symbol	feature	Description
	Group	Creates a new group in the mass tree above
	Irrigation project	Create a new irrigation project in the lower part Mass tree. please refer project start
	Contour tracing	Detects new areas with the help of contour tracing and adds them to the upper one Mass tree a. please refer Contours
	existing objects	Captures areas and adds them to the top Mass tree .

For a detailed description of the editing functions in the mass tree, see Mass Tree > Functions.

Symbol	feature	Description
	cut out	Cuts objects or mass tree structures and saves them to the clipboard.
	Copy	Copies objects or mass tree structures and saves them to the clipboard.
	Insert	Inserts previously cut or copied objects or mass tree structures into the mass tree.
	Delete	Deletes objects or mass trees.

The irrigation components with which the water is applied to the site can be created via the menu item Irrigation.

Symbol	feature	Description	Link
	Detect sprinklers automatically	Automatically creates a new sprinkler based on radius and angle.	Create irrigation > Detect sprinklers automatically
	put certain sprinklers	After specifying the group, housing and nozzle, this sprinkler is placed in the drawing.	Create irrigation > set specific sprinkler
	set certain rectangular sprinklers	After specifying the group, housing and nozzle, this sprinkler is placed in the drawing.	Create irrigation > set certain rectangular sprinklers
	Drip tube with valve	Creates a line that runs in the Irrigation Manager Materials can be assigned.	Create irrigation > Draw the drip pipe
	Draw the drip tube surface	Creates a surface that is in Irrigation Manager Materials can be assigned.	Create irrigation > Draw the drip tube surface

The menu item Connections contains all components for distribution, supply and control to create a complete irrigation system.

Symbol	feature	Description	Link
	Set water connection	Inserts a water connection (with picture) into the drawing.	Create connections > Set the water connection
	Draw lines	Creates a water line from the water connection to the valve unit.	Create connections > Draw the line
	Place valve unit	Inserts a valve unit (with picture) into the drawing.	Create connections > Set the valve unit
	Draw the valve circuit	Creates valve circuits with the selected sprinklers.	Create connections > Draw the valve circuit
	Set control unit	Inserts a control unit (with picture) into the drawing.	Create connections > Set control unit
	Draw cables	Creates a linear connection from the control unit to the power supply.	Create connections > Draw the cable

Materials used in a drawing can be summarized in material lists. These material lists can be saved, printed out or transferred to other tendering programs using a GAEB file.